Description
Introducing our new 4-axis CNC controller, which includes all the necessary inputs and outputs for controlling a CNC machine. The board is powered by 24V and has relay outputs for added functionality.
Moreover, the outputs are equipped with three types of connectors: screw-terminal, box header, and RJ45, making it easy to connect to motor drivers using network cables and adapters.
Outputs are automatically shut down for extra safety if an E-stop is activated. Additionally, a status board with LEDs indicates the state of the outputs and whether the probe or E-stop is active, making monitoring the controller’s activity easier.
Additional information
| Weight | 0,563 kg |
|---|---|
| Power | 24V |
| Axes | 4 Axes |
| Max. step freq. | 125kHz |
| Axes connection | IDC (Boxheader), RJ45, Screwterminal |
| Interface | Ethernet |
| Modbus RTU Interface | No |
| AUX inputs | 1, NPN, Max. 5V |
| Analog inputs | 2, 0-3.3V |
| Alarm input | 1, NPN, Max. 5V |
| External error input | No |
| E-Stop input | 1, NPN, Max. 5V |
| Start/run input | 1, NPN, Max. 5V |
| Pause input | 1, NPN, Max. 5V |
| Home inputs | 4, NPN, Max. 5V |
| Probe input | 1, NPN, Max. 5V |
| Spindle pulse input | 1, NPN, Max. 5V |
| Spindle Quadrature input | – |
| Handwheel quadrature input | 1, NPN, Max. 5V |
| Mist output | 1, Relay |
| Flood output | 1, Relay |
| Brake output | 1, Relay |
| AUX outputs | 1, Relay |
| PWM Ouput | 1, Combined with 0-10V output, Open-collector or 5V or 12V |
| Analog output (0-10V) | 1, Combined with PWM output |
| E-Stop output | 1, Relay |
| Spindle/tool output | 1, Relay |
| Tool Direction output | – |
| WD output | – |
| I2C output | – |
| Enable drive output | 1, TTL, 5V |
| Heartbeat output | – |
| SysReady output | 1, Open-collector |
| Breakout board | Not required |
| External status indicators | Yes, Included |
