2.2kW ATC Milling Spindle set ISO20 Watercooled (4x ceramic bearings)

NB! This is a water-cooled ATC engine, we often use the 5200 series chiller to cool the coolant. This can be found in our webshop..

Kit content:

1. CNC High Speed 2.2Kw Milling Motor 24000RPM
2. 220/230Vac 3 phase VFD SD95H

Engine Specifications:

• Dimensions: see picture
• Power: 2.2 KW Voltage: 220V
• Power Consumption: 7.6A
• Frequency: 24000RPM-400Hz
• Bearings: 4x ceramic bearings
• Tool holder: ISO 20
• Weight: 9.0Kg
• Air inlet:
• 1: air seal
• 2: tool change
• 3: de-dusting (while changing tool)
• Sensors:
• 1: Unclamp sensor PNP
• 2: Tool in clamp sensor PNP
• 3: temperature sensor
• Run out: less than 0.005mm

VFD SD95H Specifications:

• Maximum output frequency: 0~2000Hz;
• Carrier frequency: 1.0 kHz ~ 12 kHz; according to the load characteristics, the carrier frequency can be adjusted automatically
• Control Mode: V/F or Vector control
• Speed range: 1:50 (SVC); 1Hz/150% rated torque
• Overload capability: G-type: 150% rated current for 60 sec; P-type: 110% rated current for 60 sec
• Jog control: Jog frequency range: 0.00 Hz to 2000.00 Hz
• DC braking: DC braking frequency: 0.0 Hz to maximum frequency; braking time: 0.0 to 36.0 sec
• Brake current value: 0.0 to 100%;
• Simple PLC, multiple speeds: 16 speeds operating via built-in PLC or control terminal

Manual:

User Manual of SD95H Series VFD.PDF