2.2kW ATC Milling Spindle set ISO20 Watercooled (4x ceramic bearings)

2.399,99

In stock

SKU: Spindel_2.2kw_ATC_set Category:
Description

NB! This is a water-cooled ATC engine, we often use the 5200 series chiller to cool the coolant. This can be found in our webshop..

Kit content:

  1. CNC High Speed 2.2Kw Milling Motor 24000RPM
  2. 220/230Vac 3 phase VFD SD95H

Engine Specifications:

  • Dimensions: see picture
  • Power: 2.2 KW Voltage: 220V
  • Power Consumption: 7.6A
  • Frequency: 24000RPM-400Hz
  • Bearings: 4x ceramic bearings
  • Tool holder: ISO 20
  • Weight: 9.0Kg
  • Air inlet:
  • 1: air seal
  • 2: tool change
  • 3: de-dusting (while changing tool)
  • Sensors:
  • 1: Unclamp sensor PNP
  • 2: Tool in clamp sensor PNP
  • 3: temperature sensor
  • Run out: less than 0.005mm

VFD SD95H Specifications:

  • Maximum output frequency: 0~2000Hz;
  • Carrier frequency: 1.0 kHz ~ 12 kHz; according to the load characteristics, the carrier frequency can be adjusted automatically
  • Control Mode: V/F or Vector control
  • Speed range: 1:50 (SVC); 1Hz/150% rated torque
  • Overload capability: G-type: 150% rated current for 60 sec; P-type: 110% rated current for 60 sec
  • Jog control: Jog frequency range: 0.00 Hz to 2000.00 Hz
  • DC braking: DC braking frequency: 0.0 Hz to maximum frequency; braking time: 0.0 to 36.0 sec
  • Brake current value: 0.0 to 100%;
  • Simple PLC, multiple speeds: 16 speeds operating via built-in PLC or control terminal

Manual:

User Manual of SD95H Series VFD.PDF