Kit content:
- CNC High Speed 2.2KW Water Cooled / Spindle Motor
- 2.2KW 220Vac VFD SD200
- 80mm motor bracket
- water pump
- 10 Meter pipeline
Engine Specifications:
- Dimensions: Φ80mm x stator length: 240mm / total motor length (including mounting): 330mm
- Power: 2.2 KW Voltage: 220V~250V
- Power Consumption: 10A
- Bearings: 4x ceramic bearings
- Frequency: 400 Hz Speed: 8000-24000 RPM
- Collet: ER 20
- Run out: less than 0.005mm
VFD SD200 Specifications:
- Maximum output frequency: 0~600Hz;
- Carrier frequency: 1.0 kHz ~ 12 kHz; according to the load characteristics, the carrier frequency can be adjusted automatically
- Control Mode: V/F
- Speed range: 1:50 (SVC); 1Hz/150% rated torque
- Overload capability: G-type: 150% rated current for 60 sec; P-type: 110% rated current for 60 sec
- Jog control: Jog frequency range: 0.00 Hz to 600.00 Hz
- DC braking: DC braking frequency: 0.0 Hz to maximum frequency; braking time: 0.0 to 36.0 sec
- Brake current value: 0.0 to 100%;
- Simple PLC, multiple speeds: 16 speeds operating via built-in PLC or control terminal.
Water pump:
- Power: 75W;
- Flow: 3000 l/h; 5.Voltage: 220V~240V FL-PLUG-US;
- Dimensions: L 150mm * W 80mm * H 140mm;
- Fitting outer diameter: 6mm
