1.5kW Air Cooled Milling Spindle set ER11 (4x ceramic bearings)

Kit content:

1. CNC High Speed 1.5KW Air Cooled / Spindle Motor
2. 1.5KW 220Vac VFD SD200

Engine Specifications:

• Dimensions: see picture
• Power: 1.5 KW Voltage: 220V~250V
• Power Consumption: 5A
• Bearings: 4x ceramic bearings
• Frequency: 400 Hz Speed: 8000-24000 RPM
• Collet: ER 11
• Run out: less than 0.005mm

VFD SD200 Specifications:

• Maximum output frequency: 0~600Hz;
• Carrier frequency: 1.0 kHz ~ 12 kHz; according to the load characteristics, the carrier frequency can be adjusted automatically
• Control Mode: V/F
• Speed range: 1:50 (SVC); 1Hz/150% rated torque
• Overload capability: G-type: 150% rated current for 60 sec; P-type: 110% rated current for 60 sec
• Jog control: Jog frequency range: 0.00 Hz to 600.00 Hz
• DC braking: DC braking frequency: 0.0 Hz to maximum frequency; braking time: 0.0 to 36.0 sec
• Brake current value: 0.0 to 100%;
• Simple PLC, multiple speeds: 16 speeds operating via built-in PLC or control terminal.

Water pump:

• Power: 75W;
• Flow: 3000 l/h; 5.Voltage: 220V~240V FL-PLUG-US;
• Dimensions: L 150mm * W 80mm * H 140mm;
• Fitting outer diameter: 6mm