1.5kW Lucht gekoelde Frees-Spindel set


Op voorraad

Artikelnummer: Spindel_1.5kw_set Categorie:


1.5kW 220V Spindel set:
– Motor
– Freq. regelaar
– Motorsteun
===> De motorsteun kan voorzien worden van een gaten patroon. Neem contact met ons op hiervoor.  info@hardware-cnc.nl
 Wij geven 3 maanden garantie op deze sets.
1.5KW Spindle Motor Specification:
  1. Specification: Φ80mm x Length:188mm (including air interface: Φ80mm X 203mm)
  2. Power: 1.5 KW
  3. Voltage: AC220V
  4. Frequency: 0-400 Hz
  5. Max Rotation speed: 24000 R/min
  6. Chuck: ER11 collet chuck
  7. Cooling mode: air cooling mode
  8. Coaxiality: 0.025mm
  9. Radial runout: 0.01mm
  10. The speed of adjustment: 0-24000 stepless speed control can be achieved through the inverter to adjust the output voltage and operating frequency,
  11. Lubrication: high temperature grease lubrication
1.5KW Inverter Specification:


Inpute SpecificationPhase1 or 3 phase as you like
Voltage (V)220V±15%
Frequency (HZ)47-63Hz


Phase3 phase
Voltage (V)208-240V AC (analogous to Input Voltage)
Frequency (HZ)0.1-400HZ
Control ModeSPWM
Input Power220V class:220±15%(we also provide 380V item, if you need,please contact us)
5-Digits Display & Status Indicator LampDisplaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc.
Communication ControlRS-485
Working Temperature-10~45℃
Frequency ControlAccuracy
Setting Resolution
General ControlOutput ResolutionDigital: 0.1%(-10~40℃); Analog: 0.1% (25±10℃)
Operator Setting MethodDigital: 0.1Hz; Analog: 1‰ of max. Operating frequency
Analog Setting Method0.1Hz
Other FunctionsPress directly ←∧∨ to set.
Ramp ControlExternal Voltage 0-5V,0-10V,4-20mA,0-20mA.
V/F CurveFrequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set.
Torque ControlSelectable 4-speed steps ramp-up and -down time (0.1-6500s).
Protection FunctionsMulti-InputsSet V/F curve at will.
Multi-OutputsTorque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz.
Other Functions6 multi-function input terminals for 8–speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions.
Overload Protection5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings.
FuseProtectionAuto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control、Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc.
Over-voltageElectronic relay protection motor drive

Drive(for constant torque150%/1 min. for the kinds of fan 120%/1min.)

Under-voltageWhen the fuse breaks , the motor will stop.
Restart After Instant Stop220V class:DC Voltage >400V

We also stock 380V item, contact us about stock

380V class:DC Voltage >800V

Stall Protection220V class:DC Voltage <200V

We also stock 380V item, contact us about stock

380V class:DC Voltage <400V

Output Short CircuitRestart with Frequency Track afterInstant Stop
Other FunctionsStall protection in ramp operation
Electrical circuit protection
Size (L*W*H):168*124*162




This post is also available in: Engels