hall sensors Archieven - Hardware CNC

Homing sensor – PoHome1IRPNP

Boudewijn van den Brink — Tue, 01 Jul 2025 15:40:20 +0000

Homing sensors are based on non-mechanical working principle, which makes them highly accurate and repeatable by not having any moving parts. The sensors have very high accuracy and a very low failure rate. PoLabs – PoHome homing sensor will ensure accuracy in tool changes, job fixtures, homing protocols, automation. The homing sensor is very easy to mount and set in the perfect position on a machine or device. The sensor has a status LED to indicate the state of the sensor. It is a simple device and it is compatible with most CNC machines.

Features

High accuracy with no moving parts,
Homing repeatability within 10 microns (0,01 mm),
Water-resistant – IP rating: IP64,
Wide working voltage range 5 – 24 VDC,
2 m long high-quality flex cable,
Easy mounting using M3 screws.

Sensor wiring

Brown – (5-24 VDC),
Blue – ( GND).
Black – (NO – Normally Open),
White – (NC – Normally Closed).

WARNING: Connecting the power polarity in reverse will damage the sensor!

Het bericht Homing sensor – PoHome1IRPNP verscheen eerst op Hardware CNC.

Homing sensor – PoHome1IRNPN

Owen van den Brink — Mon, 22 Jan 2024 12:03:20 +0000

Features

High accuracy with no moving parts,
Homing repeatability within 10 microns (0,01 mm),
Water-resistant – IP rating: IP64,
Wide working voltage range 5 – 24 VDC,
2 m long high-quality flex cable,
Easy mounting using M3 screws.

Sensor wiring

Brown – (5-24 VDC),
Blue – ( GND).
Black – (NO – Normally Open),
White – (NC – Normally Closed).

WARNING: Connecting the power polarity in reverse will damage the sensor!

Het bericht Homing sensor – PoHome1IRNPN verscheen eerst op Hardware CNC.

HOMING SENSOR PNP IP67

Boudewijn van den Brink — Wed, 12 Aug 2020 13:51:18 +0000

The all NEW! water resistant Homing Sensors are based on a non-mechanical design which makes them highly accurate and by not having any moving parts, the sensors have very high accuracy and very low failure rate. MASSO Homing Sensors will ensure accuracy in automatic tool changes, jigs and job fixtures.

High accuracy with no moving parts
Homing repeatability better than 10 microns
Water resistant with IP65 rating
Wide working voltage range 9 to 24VDC
5 metre (16 ft) long high quality flex cable
Easy mounting using M3 screws

Het bericht HOMING SENSOR PNP IP67 verscheen eerst op Hardware CNC.