encoders Archieven - Hardware CNC

ABZ TTL/RS422 Isolated Differential Signal Splitter Module (1 to 2)

Boudewijn van den Brink — Sun, 24 Mar 2024 21:12:59 +0000

product parameters:

Input channel: linear drive input A+, A-, B+, B-, Z+, Z- (A, B, Z phase open collector)
Input signal: RS422 or TTL (If it is a 24V NPN or PNP signal, please specify before ordering)
Output channel: linear drive output: 1A+, 1A-, 1B+, 1B-, 1Z+, 1Z-; 2A+, 2A-, 2B+, 2B-, 2Z+, 2Z-.
Output signal: RS422 or TTL
Power supply: 2 groups of DC 5V, can achieve full isolation. Can also share a 5v power supply without isolation between outputs
Signal frequency: >1000KHZ
Size: 6 (length) * 8.5 (width) * 4 (height) cm (including rail bracket)

Het bericht ABZ TTL/RS422 Isolated Differential Signal Splitter Module (1 to 2) verscheen eerst op Hardware CNC.

Encoder 1024PPR ABZ A-B-Z 6000RPM (met 5M kabels)

Boudewijn van den Brink — Tue, 09 Jan 2024 11:52:36 +0000

Included:

Encoder 1024PPR ABZ A-B-Z 6000RPM
Shielded cable 5 Meters

Features:

Shaft diameter	8mm
Output form	Push Pull
Output signal	A,B,Z A-B-Z phases
Housing diameter	58mm
Pulses	1024P/R
Supply voltage	5-30VDC
Load current	40mA
Protection grade	IP51

Technical Specification:

Electrical Specification
Output circuit	Open collector	Voltage output	Push pull output	Line driver output
Power Vcc	5~30	5~30	5±0.25 5~30	5±0.25 5~30
Current	≤80mA	≤80mA	≤80mA	≤150mA
Load current	40mA	40mA	40mA	60mA
Max Responding Frequency	300kHz	300kHz	300kHz	300kHz
Mechanical Specification
Max speed(r/min)	Starting Torque	Max. Shaft Loading	Shocking	Vibration
6000	<0.05Nm	Radial:20N, Axial:10N	50G/11ms	10G 10-2000Hz
Rotor Inertia	Working Temperature	Storage Temperature	Protection Grade	Weight
4*10-8Kgm2	-30~85℃	-35~95℃	IP51	270g

Connection Table:

Signal	A	B	Z	A(-)	B(-)	Z(-)	Vcc	GND	Shielded
Color	Green	White	Yellow	Brown	Gray	Orange	Red	Black	Copper net

9Pin Plug	5	3	2	7	6	8	1	4	9

Manual:

ISC5810 Encoder catalogue.pdf

Het bericht Encoder 1024PPR ABZ A-B-Z 6000RPM (met 5M kabels) verscheen eerst op Hardware CNC.

Encoder 2500PPR ABZ A-B-Z 6000RPM (met 5M kabels)

Boudewijn van den Brink — Tue, 12 Dec 2023 15:11:10 +0000

Included:

Encoder 2500PPR ABZ A-B-Z 6000RPM
Shielded cable 5 Meters

Features:

Shaft diameter	8mm
Output form	Push Pull
Output signal	A,B,Z A-B-Z phases
Housing diameter	58mm
Pulses	2500P/R
Supply voltage	5-30VDC
Load current	40mA
Protection grade	IP51

Technical Specification:

Electrical Specification
Output circuit	Open collector	Voltage output	Push pull output	Line driver output
Power Vcc	5~30	5~30	5±0.25 5~30	5±0.25 5~30
Current	≤80mA	≤80mA	≤80mA	≤150mA
Load current	40mA	40mA	40mA	60mA
Max Responding Frequency	300kHz	300kHz	300kHz	300kHz
Mechanical Specification
Max speed(r/min)	Starting Torque	Max. Shaft Loading	Shocking	Vibration
6000	<0.05Nm	Radial:20N, Axial:10N	50G/11ms	10G 10-2000Hz
Rotor Inertia	Working Temperature	Storage Temperature	Protection Grade	Weight
4*10-8Kgm2	-30~85℃	-35~95℃	IP51	270g

Connection Table:

Signal	A	B	Z	A(-)	B(-)	Z(-)	Vcc	GND	Shielded
Color	Green	White	Yellow	Brown	Gray	Orange	Red	Black	Copper net

9Pin Plug	5	3	2	7	6	8	1	4	9

Manual:

ISC5810 Encoder catalogue.pdf

Het bericht Encoder 2500PPR ABZ A-B-Z 6000RPM (met 5M kabels) verscheen eerst op Hardware CNC.

Encoder 400PPR ABZ A-B-Z 6000RPM (met 5M kabels)

Boudewijn van den Brink — Fri, 13 Jan 2023 15:36:33 +0000

Features:

Shaft diameter	10mm
Output form	Push Pull
Output signal	A,B,Z A-B-Z phases
Housing diameter	58mm
Pulses	400P/R
Supply voltage	5-30VDC
Load current	40mA
Protection grade	IP51

Technical Specification:

Electrical Specification
Output circuit	Open collector	Voltage output	Push pull output	Line driver output
Power Vcc	5~30	5~30	5±0.25 5~30	5±0.25 5~30
Current	≤80mA	≤80mA	≤80mA	≤150mA
Load current	40mA	40mA	40mA	60mA
Max Responding Frequency	300kHz	300kHz	300kHz	300kHz
Mechanical Specification
Max speed(r/min)	Starting Torque	Max. Shaft Loading	Shocking	Vibration
6000	<0.05Nm	Radial:20N, Axial:10N	50G/11ms	10G 10-2000Hz
Rotor Inertia	Working Temperature	Storage Temperature	Protection Grade	Weight
4*10-8Kgm2	-30~85℃	-35~95℃	IP51	270g

Connection Table:

Signal	A	B	Z	A(-)	B(-)	Z(-)	Vcc	GND	Shielded
Color	Green	White	Yellow	Brown	Gray	Orange	Red	Black	Copper net

9Pin Plug	5	3	2	7	6	8	1	4	9

Manual:

ISC5810 Encoder catalogue.pdf

Het bericht Encoder 400PPR ABZ A-B-Z 6000RPM (met 5M kabels) verscheen eerst op Hardware CNC.

Encoder 200PPR ABZ A-B-Z 6000RPM (met 5M kabels)

Boudewijn van den Brink — Fri, 13 Jan 2023 15:35:56 +0000

Features:

Shaft diameter	10mm
Output form	Push Pull
Output signal	A,B,Z A-B-Z phases
Housing diameter	58mm
Pulses	200P/R
Supply voltage	5-30VDC
Load current	40mA
Protection grade	IP51

Technical Specification:

Electrical Specification
Output circuit	Open collector	Voltage output	Push pull output	Line driver output
Power Vcc	5~30	5~30	5±0.25 5~30	5±0.25 5~30
Current	≤80mA	≤80mA	≤80mA	≤150mA
Load current	40mA	40mA	40mA	60mA
Max Responding Frequency	300kHz	300kHz	300kHz	300kHz
Mechanical Specification
Max speed(r/min)	Starting Torque	Max. Shaft Loading	Shocking	Vibration
6000	<0.05Nm	Radial:20N, Axial:10N	50G/11ms	10G 10-2000Hz
Rotor Inertia	Working Temperature	Storage Temperature	Protection Grade	Weight
4*10-8Kgm2	-30~85℃	-35~95℃	IP51	270g

Connection Table:

Signal	A	B	Z	A(-)	B(-)	Z(-)	Vcc	GND	Shielded
Color	Green	White	Yellow	Brown	Gray	Orange	Red	Black	Copper net

9Pin Plug	5	3	2	7	6	8	1	4	9

Manual:

ISC5810 Encoder catalogue.pdf

Het bericht Encoder 200PPR ABZ A-B-Z 6000RPM (met 5M kabels) verscheen eerst op Hardware CNC.

MASSO Optical Encoder

Boudewijn van den Brink — Mon, 12 Oct 2020 15:59:15 +0000

Contactless optical quadrature encoders based on a non-mechanical design. By not having any moving parts, the sensors have very high accuracy and very low failure rate. The encoders can be easily mounted in front of your Lathe’s spindle pulley to provide full quadrature encoder signals for multi pass threading.

Wiring and Setup instructions: CLICK HERE

High accuracy with no moving parts
Easy to mount with no pulley or timing belts required
Wide working voltage range 12 to 24VDC
Easy mounting using M3 screws

CAUTION: Output signals are 0v for LOW signal and 10v for HIGH signal.

High accuracy with no moving parts
Easy to mount with no pulley or timing belts required
Wide working voltage range 12 to 24VDC
Easy mounting using M3 screws
WARNING: Connecting the power polarity in reverse will damage the sensor and these sensors will not work in environments where water or dust will get in contact with the sensors.
CAUTION: Output signals are 0v for LOW signal and 10v for HIGH signal.

Het bericht MASSO Optical Encoder verscheen eerst op Hardware CNC.